rallyingden
|
| posted on 20/7/09 at 09:54 PM |
|
|
Calipers
Hi I've been to my local motor factors recently who are normally very good. I wanted a pair of new / recon calipers for my build. I am running
cortina uprights but they say that the calipers I have taken in to them are not cortina as they are A.t.e cal;ipers and not Girling.
They are only 2 pot and off the top of my head the pistons are about 43 mm diameter.
Can anone verify / shed any light on why I have 2 sets of calipers with a.t.e. markings on, were these fitted to some other ford, can't think
what as the hubs do have top & bottom ball joints as per the cortina.
Any thoughts ?...................
RD 
|
|
|
|
|
eccsmk
|
| posted on 20/7/09 at 09:59 PM |
|
|
not sure if this will help but you could have a look on brakesinternational or rally designs sites see what they list ?
brakes int
RD
[Edited on 20/7/09 by eccsmk]
|
|
|
blakep82
|
| posted on 20/7/09 at 10:06 PM |
|
|
photos of them might help?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
rallyingden
|
| posted on 20/7/09 at 10:10 PM |
|
|
I will post some pics tomorrow.....
Thanks
|
|
|
britishtrident
|
| posted on 21/7/09 at 07:56 AM |
|
|
Cortina are approx 2" bore --- 52mm
[I] “ What use our work, Bennet, if we cannot care for those we love? .”
― From BBC TV/Amazon's Ripper Street.
[/I]
|
|
|
rallyingden
|
| posted on 21/7/09 at 08:12 AM |
|
|
Sorry about the size ....... working on it
RD
Right I think thats OK
As you can see it has A.t.e. on the side
RD
 
[Edited on 21/7/09 by rallyingden]
[Edited on 21/7/09 by rallyingden]
|
|
|
rallyingden
|
| posted on 21/7/09 at 01:53 PM |
|
|
Motor factor come up trumps
They are Capri
RD
|
|
|
