Dickyboy
|
| posted on 6/8/09 at 06:48 PM |
|
|
FZR 600 Mikuni carb identification
Having read GaryM's excellent post on installing FZR600 carbs on a Xflow I got a set from a well known auction site(?) to install on a 1600
Pinto. The post said, as others have, to drill the main jet to 1.5mm. Which is the main jet? Anyone know of documentation to a: identify exactly which
carbs I have and b: which adjustment/jet does what? I also assume the carbs should be at a slight angle to make the top of the float chamber
horizontal? without knowing and seeing the bike they were on I can't tell. Any other words of advice on these carbs.
[Edited on 6/8/09 by Dickyboy]
 
Rescued attachment mikuni1.jpg
|
|
|
|
|
GaryM
|
| posted on 6/8/09 at 08:17 PM |
|
|
Hiya
They don't look like my FZR600 carbs?
If you u2u me an email address I can email you the carbs section of the FZR600 workshop manual.
Cheers
Gary
|
|
|
