scutter
|
| posted on 20/8/09 at 09:20 PM |
|
|
Atlas rear brakes
My Atlas axle has no rear brakes at the mo, I've picked up a set of backplates cheaply enough, but the internals are going to cost the earth
seperately.
I'm aware of the benefits of discs and also there drawbacks, but who is doing the parts to convert the axle? and rougly what are people
paying?
ATB Dan.
The less I worked, the more i liked it.
|
|
|
|
|
Antnicuk
|
| posted on 21/8/09 at 08:21 PM |
|
|
i paid £10 for a pair of caliper brackets, £25 for a pair of 2wd cosworth calipers and £15 for a pair of new mk1 fiesta front discs, which are nice a
small so not too much breaking. I used a Sierra handbrake cable make the h/brake work properly, then it just took a little bit of tinkering to get
everything to fit.
600 BHP per ton, Stylus Brought back from the dead! Turbo Rotary Powered!
|
|
|
scutter
|
| posted on 21/8/09 at 10:44 PM |
|
|
Cheers I've access to the discs and both sierra and pug rear calipers, Looks like a visit to my local chef(buuilder) to tinker in his garage.
ATB Dan.
|
|
|
