JAMSTER
|
| posted on 3/1/10 at 05:26 PM |
|
|
wtd 2.0 pinto
wanted 2.0 pinto cheeeeeeeep as pos please for kit car build thanks
[Edited on 3/1/10 by JAMSTER]
|
|
|
|
|
DRC INDY 7
|
| posted on 3/1/10 at 05:32 PM |
|
|
I know it does not help but i have a 1637cc pinto engine for sale
3000 miles from a total rebuild with rebore and new pistons £200
https://www.facebook.com/groups/462610273778799/
Puddle Dodgers Club
|
|
|
JAMSTER
|
| posted on 3/1/10 at 05:38 PM |
|
|
whats the full spec does it have kent/piper cam carbs exhaust
i have a 1.6 but straight out of doner and i have some what i think are zx6 carbs
i also have a 1.8 duratec just a little complicated stick to simple for now
|
|
|
*davies144*
|
| posted on 3/1/10 at 05:45 PM |
|
|
hi i also have a fully re-conned 1600 pinto with polish ports? its in two halves ready to go back together £100? ono
|
|
|
DRC INDY 7
|
| posted on 3/1/10 at 05:47 PM |
|
|
New camshaft kit standard
all valves lapped in
AE cast plus 1mm pistons
polished crank with all new bearings
high pressure oil pump
engine has done 3000 miles since the rebuild comes with no ancillaries no clutch
i ran this on zx6r carbs
requires sump and cam cover
[Edited on 1/3/2010 by DRC INDY 7]
https://www.facebook.com/groups/462610273778799/
Puddle Dodgers Club
|
|
|
philhoward
|
| posted on 3/1/10 at 06:34 PM |
|
|
I have a 2 ltr Pinto available that you can have for £30.00. (not a 205 block). It has not been run for years so could be siezed, so would probably
need a rebuild. The crank pulley and oil seal housing are missing but these could be easily replaced. Let me know if you are interested.
|
|
|
ash_hammond
|
| posted on 3/1/10 at 09:04 PM |
|
|
Phil, second dibs if JAMSTER is not interested.
-- Ash
ash.hammond(at)gmail.com - my u2u does not work.
quote:
Originally posted by philhoward
I have a 2 ltr Pinto available that you can have for £30.00. (not a 205 block). It has not been run for years so could be siezed, so would probably
need a rebuild. The crank pulley and oil seal housing are missing but these could be easily replaced. Let me know if you are interested.
.: www.mac1motorsports.co.uk | www.m1moc.com :.
|
|
|
FASTdan
|
| posted on 7/1/10 at 09:24 PM |
|
|
We will be selling our 2.0 pinto:
Out of a 100k injection sierra. Valves reground, Honed, new HG approx 2000 miles ago.
Running twin dellorto's made 110bhp@rear wheels on bogg bros rollers.
Everything available apart from exhaust manifold and it can be seen running (passenger ride) in the car.
U2U if of any interest. Located Bradford, West Yorks.
NEW danST WEBSITE NOW LIVE! Bike carbs, throttle bodies and more......
http://www.danstengineering.co.uk/
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
jacko
|
| posted on 8/1/10 at 07:29 PM |
|
|
This any good to you
quote:
http://www.locostbuilders.co.uk/viewthread.php?tid=127919
|
|
|
.JPG)
