Chris_R
|
| posted on 26/4/04 at 05:52 PM |
|
|
Dual bore master cylinder to suit sierra calipers.
Does anyone know the amount of preasure the standard Sierra master cylinder and servo produce? I'm trying to find a dual bore master cylinder
that wil suit the Sierra calipers, but without the servo. I've heard tell that a cylinder with a 19mm bore will do the job. If anyone
know's of such a master clylinder and supplier, that information would be invaluable.
Cheers,
Chris.
A bit of slapstick never hurt anyone.
http://www.chris.renney.dsl.pipex.com/
|
|
|
|
|
britishtrident
|
| posted on 26/4/04 at 06:27 PM |
|
|
Early 80s base model VW Golf or Polo without servo
Euro parts sell new cylinders for pennies (well almost) but they come without a resevior so a trip to the scrappies is required -- some Ford
resevoirs also fit.
|
|
|
Chris_R
|
| posted on 26/4/04 at 06:47 PM |
|
|
Good stuff, there's a branch near where I work. do you happen to know if they have a push rod or if i'd need to make one?
A bit of slapstick never hurt anyone.
http://www.chris.renney.dsl.pipex.com/
|
|
|
britishtrident
|
| posted on 27/4/04 at 07:08 AM |
|
|
You need to make one, the details of the cylinders end will become apparent when you get hold of one -- I just ground a round head on long
5/16" UNF HT bolt. Only thing to watch is that the piston in the cylinder comes back far enough to clear the recuperating port.
|
|
|
Chris_R
|
| posted on 27/4/04 at 04:45 PM |
|
|
Thanks muchly. Will have a look in on the weekend.
A bit of slapstick never hurt anyone.
http://www.chris.renney.dsl.pipex.com/
|
|
|
