karlak
|
| posted on 31/3/10 at 07:38 AM |
|
|
My MK Indy steering rack.
OK, so now I am getting a few bits sorted on my MK, I am now looking towards changing the steering rack for a quicker steer jobby. At the moment it
has about 4 turns lock to lock, which I guess is the standard Rack.
What I would like is more like 2.5 - 2.9, but am more concerned about the process of changing. What I really would like is for a new rack which
simply replaces the current one, mark the track rod positions and swap them over. Am I being too hopeful ? Does a rack exist that will allow this ?
MK Indy - 2litre Duratec - Omex 600 - Jenvey throttle bodies - ETB DigiDash2
|
|
|
|
|
TimC
|
| posted on 31/3/10 at 08:08 AM |
|
|
Speak to MNR.
|
|
|
ReMan
|
| posted on 31/3/10 at 11:48 AM |
|
|
Too hopeful.
The MK rack is shortened from the off the shelf size, so this would need doing.
As far as marking and putting back together with no adjustment needed, no chance!
|
|
|
mad-butcher
|
| posted on 31/3/10 at 03:43 PM |
|
|
As said "no chance" I personally run 2mm toe in, so any slight discrepancy in machining is going to throw it out
tony
|
|
|
