oldgit485
|
| posted on 17/7/04 at 09:33 AM |
|
|
Tapered reamer
Saw this on a JZR site which uses Transit drag link end also.Part no 91089411 tapered reamerTaper is 1.5" in 12" which appears to be the
1:8 that I believe the transit end to be.Hope it helps someone,perhaps a "group purchase"could be made ?
Just google 91089411
http://www.speedwaymotors.com
Best rgds oldgit
|
|
|
|
|
Steve Hnz
|
| posted on 18/7/04 at 08:30 AM |
|
|
I`ve recently purchased a reamer from this outfit http://www.chadwickreamers.com/ a lot cheaper than the speedway shop but then these guys actually
make them. Freight to New Zealand was going to be more expensive than the reamer( which was US$50.50) but they did offer to investigate a cheaper way
to send. I was lucky to have neighbours visiting the US so they have it & I`m waiting for it to complete its world trip & arrive home. They
don`t do international Visa (quaint!) & would need a bank draught but were very helpful & obliging to me. Certainly worth checking out
|
|
|
Hugh Jarce
|
| posted on 24/7/04 at 02:07 AM |
|
|
heres a few more reamer links
http://www.bcbroncos.com/shoptools1.html
http://www.icscuttingtools.com/Reamers.htm
The pay isn't very good , but the work's hard.
|
|
|
