AndyRead
|
posted on 1/8/11 at 05:16 PM |
|
|
Reservoir Bracket
I have had a good search but cant find what I want!
Does anyone know where I can get a bracket for this?
http://www.cbsonline.co.uk/product/2_Chamber_Brake_Fluid_Reservoir_FLRES2
Thanks in advance!
[Edited on 1/8/11 by AndyRead]
Andy
|
|
|
SeaBass
|
posted on 1/8/11 at 05:19 PM |
|
|
WTF bracket?
|
|
AndyRead
|
posted on 1/8/11 at 05:26 PM |
|
|
The reservoir is remote from the master cylinder so needs securing to the chassis!
Andy
|
|
spdpug98
|
posted on 1/8/11 at 05:49 PM |
|
|
I just got a small bit of ali and put 90degree bend in it and rivetted it to the bulk head above the cylinders, used a cable tie to secure in place
ETA: pic
[Edited on 1/8/11 by spdpug98]
My Blog: http://spdpug98.wordpress.com/
|
|
AndyRead
|
posted on 1/8/11 at 05:59 PM |
|
|
I had thought about making one, but would like a proper one if they are available!
Andy
|
|
macc man
|
posted on 1/8/11 at 06:57 PM |
|
|
I made one from 3 mm alloy strip. Works well and looks good.
|
|
Davegtst
|
posted on 1/8/11 at 07:50 PM |
|
|
I made my own too. Didn't realise you could get a proper one.
|
|
norfolkluego
|
posted on 1/8/11 at 08:01 PM |
|
|
I've just taken one of those off my car, thing was wobbling about all over the place. Bracket was two ally strips, pop riveted at right angles,
one wrapped around it side to side, one across the to and bottom and bolted to the chassis.
Utterly useless, flopped about like a.......floppy thing.
Probably got a picture of it somewhere, I'll have a look
Old one
New one
|
|
eddie99
|
posted on 1/8/11 at 08:24 PM |
|
|
Don't think a proper bracket is available, making it is the only option
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
AndyRead
|
posted on 1/8/11 at 10:01 PM |
|
|
quote: Originally posted by eddie99
Don't think a proper bracket is available, making it is the only option
Oh well another little project for an evening!
Andy
|
|