mandy69
|
| posted on 22/8/04 at 06:43 PM |
|
|
dashboard
Hi,
Are the grp dashboards i see advertised legal as far as the SVA are concerned?
Thanks
|
|
|
|
|
marktigere1
|
| posted on 23/8/04 at 03:39 PM |
|
|
Provided they have the correct radiused bottom edge and padded surface with dials counter sunk I don't see a problem.
Or am I missing something
Cheers
Mark
If a bolt is stuck force it.
If it breaks, it needed replacing anyway!!!
(My Dad 1991)
|
|
|
Viper
|
| posted on 23/8/04 at 04:27 PM |
|
|
you dont have to have a padded surface or counter sunk dials...
|
|
|
JoelP
|
| posted on 23/8/04 at 05:11 PM |
|
|
as viper says, its just the radius rule applied to the inside, excluding the exempt area behind the wheel. The lower radius must be 5mm and soft (ie
no edge feelable) or 19mm and hard. provided the guages are rounded off, or exempt, they are ok.
|
|
|
marktigere1
|
| posted on 24/8/04 at 11:57 AM |
|
|
I didn't think the dials could extend beyond the surface as this made them a projectile?
My mistake.
Cheers
Mark
If a bolt is stuck force it.
If it breaks, it needed replacing anyway!!!
(My Dad 1991)
|
|
|
