strikerguy
|
| posted on 7/2/14 at 11:16 AM |
|
|
Striker mk3 Master brake cylinder
Anyone familiar with this master brake cylinder from a 1990 Sylva Striker mk3 ?
It seems not to be an Escort or Sierra version. Lockheed 70-32x-426 Three outlets, 1 for back brakes and 2 for front brakes.
Thx !
[Edited on 7/2/14 by strikerguy]
[Edited on 7/2/14 by strikerguy]
|
|
|
|
|
strikerguy
|
| posted on 7/2/14 at 12:16 PM |
|
|
Strange ! Got a notification: "Just letting you know that a new reply was posted in your subscribed thread 'Striker mk3 Master brake
cylinder'. "
but nothing here 
|
|
|
Paul AS
|
| posted on 7/2/14 at 01:40 PM |
|
|
That looks just like the one that Jeremy Phillips is still using in the J16 riot (until recently) and the same as the one in my J15 one off that he
did for me in 2012
Give him a ring at Sylva Autokits and he will be able to tell you staright away
Paul
|
|
|
strikerguy
|
| posted on 7/2/14 at 02:05 PM |
|
|
Hi Paul,
I contacted Jeremy this morning but he was not able to tell me what type it is, therefore this post
This master cylinder can be confused with a Sierra version, but the mounting plate on that is in a horizontal direction.
Regards
Dirk
|
|
|
Paul AS
|
| posted on 7/2/14 at 02:50 PM |
|
|
I'll have a look at mine tomorrow. Send me your email address by U2U and I'll send you some photos and any information and identification
marks.
Paul
|
|
|
striker-4age
|
| posted on 7/2/14 at 06:07 PM |
|
|
Hi there 
That is a robin reliant master cylinder 👍
Striker-4age x2
|
|
|
strikerguy
|
| posted on 7/2/14 at 07:07 PM |
|
|
ok, it cannot be denied that this is a kitcar:
front uprights from a Vauxhall Chevette with Austin Maxi balljoints, back axle from a Ford Escort mk2 but connected to the chassis with 3 Chevette
Panhard rods and 2 home brew rods, a Reliant Robin master brake cylinder, 3 different types of metalastic bushes and still wondering what the steering
rack is from 
Thanks striker-4age !
|
|
|
striker-4age
|
| posted on 7/2/14 at 08:22 PM |
|
|
Should b a chevette rack m8
|
|
|
