steveabr
|
| posted on 15/8/15 at 09:05 PM |
|
|
steering column problems
Sorry for what is probably a dumb question. Bought my haynes as a rolling chassis now have it running and driving, a lot damn quicker than I thought
for a 1.8 pinto.
Anyway I have a plastic grommet whit fits into the rubber grommet as the shaft exits the bulkhead. The plastic part keeps moving out thus making the
steering slack. Has anyone got any ideas??
Cheers
|
|
|
|
|
rusty nuts
|
| posted on 15/8/15 at 09:28 PM |
|
|
Do a search on here for self aligning bearing , it's been covered several times
|
|
|
andrew.carwithen
|
| posted on 15/8/15 at 09:34 PM |
|
|
The bearing is an SLFL 25.
Plenty on eBay.
|
|
|
jossey
|
| posted on 15/8/15 at 11:07 PM |
|
|
http://www.locostbuilders.co.uk/viewthread.php?tid=153959
What I use is on that thread
Thanks
David Johnson
Building my tiger avon slowly but surely.
|
|
|
steveabr
|
| posted on 18/8/15 at 08:24 AM |
|
|
Thanks for the help guys.
|
|
|
.jpg)
