sdh2903
|
 posted on 30/12/15 at 05:13 PM |
|
|
Master cylinder pushrods.
I'm looking at various tandem master cylinder options for my build. The fiat 124 or later uno ones seem popular and look an ideal bore size at
19mm. However none seem to come with the pushrods. My question is does antone know if they are all a standard size? 5/16 seems to be popular but m8
are available too. The cylinder I'm looking at is the one below
http://m.onlinecarparts.co.uk/delphi-1762249.html
Cheers
Steve
|
|
|
|
|
locost7-online.com
|
| posted on 30/12/15 at 06:23 PM |
|
|
+1 for pushrods for these same cylinders
Locost Xflow 150bhp injected! Sold :-(
Facebook blog https://www.facebook.com/Johns-Tiger-Avon-Build-814223212056368/
PLEASE NOTE THIS MEMBER IS NOT A TRADER.
|
|
|
gremlin1234
|
| posted on 30/12/15 at 07:41 PM |
|
|
if its not a threaded rod then 5/16th (7.9375mm) is equivalent to 8mm
in the same way as the nominally 19mm cylinder you linked to, is actually 19.05 ie exactly 3/4 inch.
http://www.engineeringtoolbox.com/inches-mm-conversion-d_751.html
|
|
|
adithorp
|
| posted on 30/12/15 at 07:47 PM |
|
|
The thread only has to match the clevis thread where it connects to your pedal. At the cylinder end it's just rounded to fit into a cup/hollow
in the piston.
8mm and 5/16" are similar and both diameters will fit the cylinder, just choose one to match your clevis.
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
|
sdh2903
|
| posted on 30/12/15 at 08:02 PM |
|
|
Thanks, I've ordered both the cylinder and rod now. Hopefully they'll slot together nicely 
|
|
|
locost7-online.com
|
| posted on 30/12/15 at 08:13 PM |
|
|
quote:
Originally posted by sdh2903
Thanks, I've ordered both the cylinder and rod now. Hopefully they'll slot together nicely
What pushrods did you order and from where?
Locost Xflow 150bhp injected! Sold :-(
Facebook blog https://www.facebook.com/Johns-Tiger-Avon-Build-814223212056368/
PLEASE NOTE THIS MEMBER IS NOT A TRADER.
|
|
|
sdh2903
|
| posted on 30/12/15 at 08:25 PM |
|
|
Went for a 5/16 as already have a clevis. From eBay
eBay Item
[Edited on 30/12/15 by sdh2903]
|
|
|
