Joshy
|
| posted on 12/3/16 at 09:41 PM |
|
|
Fuel tank vent
Hi all
I'm having a hard time working out how do let my fuel tank vent air both ways whilst preventing fuel leaks/spillage. I've found this
http://www.carbuildersolutions.com/u...breather-valve but I'm wondering if there is a 'locost' way of doing it that is still good
for the IVA?
Thanks
Josh
|
|
|
|
|
big-vee-twin
|
| posted on 12/3/16 at 09:53 PM |
|
|
I used this passed IVA a week ago
link
Put it in a pipe with breather filter on the end.
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
AndyW
|
| posted on 12/3/16 at 10:14 PM |
|
|
As above, I used this one too and passed iva (3 years ago) without any issues
|
|
|
Rosco86
|
| posted on 13/3/16 at 07:22 AM |
|
|
Little bit cheaper than car builder https://www.merlinmotorsport.co.uk/p/roll-over-valve-in-line-with-5-16-8mm-push-on-tails-m-trl88
My Build Thread
|
|
|
owelly
|
| posted on 13/3/16 at 09:11 AM |
|
|
I used a tank vent from a Corsa (iirc) and wired it to the fuel pump supply. It only opens when the pump is running, which only runs when the engine
is running, which has an inertia switch fitted.
[Edited on 13/3/16 by owelly]
http://www.ppcmag.co.uk
|
|
|
