craigdiver
|
| posted on 6/5/17 at 01:11 PM |
|
|
Handbrake location
Was in a Citroen van the other day and the handbrake was to the right of the drivers seat, anyone put their handbreak just in front of the drivers
seat on the right hand side rather than on the transmission tunnel? I've had my seat in place and guesstimate the released handbrake would be
clear of my leg and out the way.
If it ain't broken, fix it anyway (just because).
Building - BMW powered Haynes Roadster/442E hybrid.
Volvo C30 T5 Polestar
|
|
|
|
|
Talon Motorsport
|
| posted on 6/5/17 at 01:58 PM |
|
|
What ever works for you, just remember though if your going to use 4 point harness's that you may have trouble leaning forward enough to reach
it? I seem to remember that a/the Rush has/had it under the steering column at one point although I stand to be corrected.
|
|
|
craigdiver
|
| posted on 6/5/17 at 02:28 PM |
|
|
Thats what I like about putting ideas out there, never thought of the lack of movement whilst wearing 4 point harness, will get everything in place
and see if I can reach.
If it ain't broken, fix it anyway (just because).
Building - BMW powered Haynes Roadster/442E hybrid.
Volvo C30 T5 Polestar
|
|
|
Ugg10
|
| posted on 6/5/17 at 04:38 PM |
|
|
Not sure how much room is in a locost tunnel but on the fisher fury you could mount it inside the tunnel using a modified I.e. Bent bracket, Sierra
hand brake.
[Edited on 6/5/17 by Ugg10]
---------------------------------------------------------------
1968 Ford Anglia 105e, 1.7 Zetec SE, Mk2 Escort Workd Cup front end, 5 link rear
Build Blog - http://Anglia1968.weebly.com
|
|
|
