cb500t
|
| posted on 26/11/17 at 12:46 AM |
|
|
PCD redrilling in the North East
Anyone advise me on where to go or more importantly where NOT to go
|
|
|
|
|
Nickp
|
| posted on 26/11/17 at 06:29 PM |
|
|
quote:
Originally posted by cb500t
Anyone advise me on where to go or more importantly where NOT to go
Morrisons, you'll be wasting your time. I'll get my coat 
|
|
|
Shiggins92
|
| posted on 26/11/17 at 10:51 PM |
|
|
AMAC Engineering
Northallerton
|
|
|
CNHSS1
|
| posted on 27/11/17 at 10:10 AM |
|
|
Ian jemison engineering done a few for me. Some are 're drilled where possible, others they've turned up bungs, plug welded them in and
're machined, nicely done
"Racing is life, everything else, before or after, is just waiting"---Steve McQueen
|
|
|
cb500t
|
| posted on 27/11/17 at 10:33 AM |
|
|
If you dont mind me asking what kind of price were you charged as I messaged Jemisons and received no reply..
|
|
|
CNHSS1
|
| posted on 27/11/17 at 11:59 AM |
|
|
The last set if 4 I had done was 260 quid iirc but they were split rim centres and couldn't be 're drilled 45 deg out, had to be plugged
(16 plugs), welded, machined back and then re drilled so lot of work. Simple re drilling was much cheaper. Id ring them, usually Ben that answers.
They build and rally chevette and Porsches so they won't do anything that won't withstand the rigours of hard use
"Racing is life, everything else, before or after, is just waiting"---Steve McQueen
|
|
|
cb500t
|
| posted on 27/11/17 at 12:08 PM |
|
|
Many thank..I only need 2 wheels sorting so not bad at all..
|
|
|
