Jonb_5
|
| posted on 25/11/19 at 06:38 PM |
|
|
Tip hung pedal box - plans
Hi,
I am going to make a top hung pedal box to make with theaster cylinders I currently have an wondered if anyone had done this before and how they went
about it.
Thanks
Jon
|
|
|
|
|
JC
|
| posted on 26/11/19 at 06:55 AM |
|
|
There’s a set of plans in the Haynes Roadster manual that could be inverted and adapted?
|
|
|
David Jenkins
|
| posted on 26/11/19 at 08:01 AM |
|
|
I sketched out what I wanted, then made a mock-up frame using thin MDF to hold the pedals (from an old Escort).
After fiddling around and making adjustments I drew up final sketches and transferred them to metal sheet.
|
|
|
Rod Ends
|
| posted on 26/11/19 at 01:05 PM |
|
|
Have a look on Wilwood, Tilton, AP Racing, etc. sites as they have drawings for their pedals.
|
|
|
motorcycle_mayhem
|
| posted on 27/11/19 at 05:55 PM |
|
|
If these would save you some time and/or hassle, I do have a top pedal set (brakes and clutch) on a shaft. There's a related accelerator pedal
(more of an addendum) which is lurking somewhere... somewhere...
 
Description
 
Description
|
|
|
