snippy
|
| posted on 27/3/20 at 02:21 PM |
|
|
Type 9 prop measurement required
Trying to find the length of the slide yoke part on a propshaft that slips into the rear of a Type 9 box. Has anyone got a prop lying about they can
measure please? The yoke is the UJ type, not rubber joint. Just need the length of the tubular section that fits onto gearbox output shaft. Thanks
|
|
|
|
|
Myke 2463
|
| posted on 27/3/20 at 02:51 PM |
|
|
My spare is 102mm.
Be Lucky Mike.
|
|
|
snippy
|
| posted on 27/3/20 at 09:58 PM |
|
|
That's great thanks. I have 50mm visible out the back of the box so I've got another 50mm on the shaft then. Thanks for that.
|
|
|
Kerrsco22
|
| posted on 29/3/20 at 07:14 PM |
|
|
I have a prop off my supercat which fits type 9 onto Sierra diff
|
|
|
