Andy_mr2sc
|
| posted on 13/9/25 at 12:19 PM |
|
|
7" ZF Diff Question
Is anyone here using a 7" Ford diff with a ZF LSD in it? If so can you tell me what drive shafts it uses, and how are they fixed into the diff?
Do they use a circlip, bolt through the middle, locking ring, etc?
Thanks,
Andy
|
|
|
|
|
JMW
|
| posted on 15/9/25 at 04:14 PM |
|
|
Not looked at mine closely since I bought it. It was described to me as having a 7" diff, with a ZF LSD (I can vouch for that bit having removed
the end plate), but he emphasised the drive shafts were "push-in" as opposed to bolted. Don't know what the implications of this are,
beyond the obvious.
|
|
|
bi22le
|
| posted on 16/9/25 at 04:42 PM |
|
|
I may be interested in buying a 7" ZF LSD with push in shafts if anyone is willing to sell one in good condition . . .
Track days ARE the best thing since sliced bread, until I get a supercharger that is!
Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1
Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I
|
|
|
