Northy
|
 posted on 27/1/03 at 09:12 PM |
|
|
Uno brake bias valve positioning
Hi all,
I have decided on using the Uno bias valve, as adjustability is good (as long as not for SVA) for the future (rear disks, tract days etc).
My question is, where should I fit it? I was thinking under the master cylinder, as there is very little room at the rear (plus its easy to get to in
the future to play with). Any problems doing this?
Graham
Website under construction. Help greatfully received as I don't really know what I'm doing! 
"If a man says something in the woods and there are no women there, is he still wrong?"
Built 2L 8 Valve Vx Powered Avon
|
|
|
|
|
theconrodkid
|
| posted on 27/1/03 at 09:30 PM |
|
|
have a look at bob,s photo archive,thats where he put his
who cares who wins
pass the pork pies
|
|
|
Northy
|
| posted on 27/1/03 at 09:33 PM |
|
|
I looked at that photo and couldn't figure out where it was!
Who made the bracket?
Graham
Website under construction. Help greatfully received as I don't really know what I'm doing!
"If a man says something in the woods and there are no women there, is he still wrong?"
Built 2L 8 Valve Vx Powered Avon
|
|
|
bob
|
| posted on 27/1/03 at 11:01 PM |
|
|
Graham
From front of car looing into engine bay,the bias valve is to the left of master cylinder tucked away nicely in corner.
|
|
|
theconrodkid
|
| posted on 27/1/03 at 11:54 PM |
|
|
going by the crappy welding the bracket could be one of mine
who cares who wins
pass the pork pies
|
|
|
