locoboy
|
| posted on 24/7/06 at 08:41 PM |
|
|
Steering wheel boss
Hi,
I have this wheel, dont know what make it is but it has got a finely splined inner to the connector boss.
 
steering wheel
Im using a sierra column and it has a hexagonal end on it, any ideas on what i need to do to mate the two together?
[Edited on 24/7/06 by locoboy]
ATB
Locoboy
|
|
|
|
|
big_wasa
|
| posted on 24/7/06 at 08:54 PM |
|
|
looks like a mountney
|
|
|
big_wasa
|
| posted on 24/7/06 at 08:56 PM |
|
|
picImage deleted by owner
|
|
|
Chippy
|
| posted on 24/7/06 at 10:44 PM |
|
|
Try Watford Classic Cars, ( they have an ebay shop). Do all types of wheel boss's, and fairly Locost. Hope that helps, Ray
|
|
|
chockymonster
|
| posted on 24/7/06 at 10:46 PM |
|
|
The ebay guys are Race Dynamics
PLEASE NOTE - Responses on Forum Threads may contain Sarcasm and may not be suitable for the hard of Thinking.
|
|
|
MikeRJ
|
| posted on 25/7/06 at 12:10 AM |
|
|
The bosses for most of those style of steering wheels are interchangeable, e.g. OMP, Raid, Momo, Mountney M series etc.
http://cgi.ebay.co.uk/Ford-Orion-Escort-Sierra-Steering-Wheel-Boss-BNIB_W0QQitemZ150014663895QQihZ005QQcategoryZ21654QQssPageNameZWDVWQQrdZ1QQcmdZView
Item
|
|
|
NS Dev
|
| posted on 25/7/06 at 12:07 PM |
|
|
Yep, in the good ol days that would have been referred to as a raid pattern wheel, and as you say pretty much any boss will fit other than the big
diameter mountney classic ones.
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
