dnmalc
|
| posted on 24/8/06 at 07:21 PM |
|
|
Clevis, yoke, or fork end
Hope somebody can help me i am looking for a pair of 1/2 inch Clevis, yoke, or fork end with a M12 male thread to support the turnbuckle on my IRS. I
have found some in the springfix catalogue but they will only supply in a min of 30 off as I want 2 this is a bit of overkill. Any suggestions.
As this is load bearing I am assuming that the SVA may require me demonstrate its load bearing capacity so I suspect that I cannot machine one up.
|
|
|
|
|
JoelP
|
| posted on 24/8/06 at 07:27 PM |
|
|
i was looking for one with a 5/8 unf thread, probably for the exact same use as you. Nat gave me a link but i never got round to ringing them. I think
it was racers hardware on 01733211311, unfortunately no web presence. If you have to buy a bundle id probably take 4 off you, ideally 5/8ths as i
already have the inserts made! 
|
|
|
dnmalc
|
| posted on 24/8/06 at 07:54 PM |
|
|
Joel Like you I mave made the threaded bush at M12 and the boss at 1/2 so I suspect we are incompatible but hey ho
|
|
|
caber
|
| posted on 24/8/06 at 09:50 PM |
|
|
try a yacht chandlers or local sailing club, these things are all over yacht rigging!
Caber
|
|
|
suparuss
|
| posted on 25/8/06 at 05:52 AM |
|
|
http://www.midwestcontrol.com
|
|
|
JoelP
|
| posted on 25/8/06 at 06:58 AM |
|
|
midwest no longer ship to the UK, except their few regular customers.
|
|
|
Nick Skidmore
|
| posted on 25/8/06 at 10:23 AM |
|
|
Try Tuthill Controls, Hailsham East Sussex.
01323 841510
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
dnmalc
|
| posted on 25/8/06 at 09:45 PM |
|
|
Thanks Guys I did try chandlers but they seem generally to have much lighter clevises. I will try Tuthill
|
|
|
