Toady1
|
| posted on 27/9/06 at 03:21 PM |
|
|
geometry and corner weighting
does anyone know what the average cost for this is?
[Edited on 27/9/06 by Toady1]
|
|
|
|
|
ernie
|
| posted on 27/9/06 at 04:28 PM |
|
|
propcomp in birmingham are exellent at average of 125.00. will pull all shocks off and balance them on some tech machine etc etc very friendly and
explains wat happning as they go along ask for amat or ivan
|
|
|
RazMan
|
| posted on 27/9/06 at 06:45 PM |
|
|
Aeon charged me £180 inc vat for geometry setup and £35 for corner weighting
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
Toady1
|
| posted on 28/9/06 at 08:13 AM |
|
|
cheers, so £300 is steep then!
|
|
|
procomp
|
| posted on 28/9/06 at 08:33 AM |
|
|
Hi you can tell Ernie is a locoster as it actualy cost him more than £125. For a full setup and cornerweight and pulling all dampers of and checking
them on the dyno and checking the springs price should be about £180-£200.
Yes £300 is taking the p**s.
cheers matt
|
|
|
ernie
|
| posted on 1/10/06 at 06:14 PM |
|
|
yes it was actually £175 for the complete race setup but basic stuff is around 125
|
|
|
