garage19
|
posted on 14/2/07 at 08:42 AM |
|
|
How much for a Bogg Bros inlet manifold??
Any one got a Bogg Bros inlet manifold for bike carbs/TBs?
And if so how much do they charge?
|
|
|
viatron
|
posted on 14/2/07 at 09:09 AM |
|
|
the full kit, manifold and reconditioned bike carbs is, from memory, £350
Give Stephen a call on 01944738234
|
|
donut
|
posted on 14/2/07 at 09:20 AM |
|
|
If you send carbs that you have they will make the inlet manifold, attach to the carbs and jet them to run well for about £190. To get the best out of
them they will need a rolling road session but they will work fine as is.
Andy
When I die, I want to go peacefully like my Grandfather did, in his sleep -- not screaming, like the passengers in his car.
http://www.flickr.com/photos/andywest1/
|
|
MikeR
|
posted on 14/2/07 at 09:23 AM |
|
|
what about if you just want a manifold for your (fuel injected) throttle boddies?
I know, i'm getting lazy, just curious how much they'd want to make blackbird bodies to a crossflow or zetec.
|
|
Billbro
|
posted on 14/2/07 at 10:07 AM |
|
|
Called them last Friday. Fireblade carbs to Zetec manifold £188.
Send them the carbs and they will clean and jet them for your application, total £260.
Don't know if that includes VAT.
Going to see a local stainless steel fabricator today.
Bill
|
|
indykid
|
posted on 14/2/07 at 07:43 PM |
|
|
as above.
i was told that was the total cost, so it'd best include vat!
will be taking them my carbs in the near future. pretty has a price, unfortunately.
tom
|
|
bob
|
posted on 14/2/07 at 08:37 PM |
|
|
Yup £260 all in for my fireblade carbs on a zetec manifold,they should be plug and play or as near as dam it when they get here.
As said earlier the manifold alone comes to £188 so the rest is sorting the carbs,£350 for the supply of carbs and inlet is pretty good as i paid £90
for my carbs so theres nothing in it.
|
|
mad4x4
|
posted on 14/2/07 at 10:15 PM |
|
|
£188 for GSXR 750 to Zetec. not sure if thats ex vat
Scot's do it better in Kilts.
MK INDY's Don't Self Centre Regardless of MK Setting !
|
|
tri
|
posted on 14/2/07 at 10:27 PM |
|
|
Manifold/Bike carbs
Have you thought about KNN Manifolds Manifold (Pinto they also can provide others) , GSXR 600 carbs jetted and spaced to fit manifold - £205 delivered
in 2 weeks. Good peice of kit worth considering.
Link http://www.knnmanifolds.homelinux.com/knnmanifolds/zetec.php3
|
|
stevebubs
|
posted on 14/2/07 at 11:22 PM |
|
|
Hmmm....only comment I would make on this is that you're saving on the carbs but spending more on the manifolds....
IMHO, they're overpricing the manifolds...but then again, they're charging what the market will pay...
|
|
rebelrider
|
posted on 14/2/07 at 11:41 PM |
|
|
I agree a metal plate with 4 pipes welded on £188 is a lot of money it would have to be solid gold for me to pay that
|
|
bob
|
posted on 15/2/07 at 12:04 AM |
|
|
It is a fair amount of money but i've seen some of boggs work and its not that easy,its angles and spacing and you have to get it right.
Throttle bodies are far easier if the bodies seperate,straight tubes so Mr avarage could probably weld that up.
Until more suppliers come along the price will stick
|
|
Syd Bridge
|
posted on 15/2/07 at 10:11 AM |
|
|
If I knew I was going to sell a few of them, I could do a plain straight tube inlet for t/b's for £188!!!!!, out of carbon and associated
materials.
I've been making cfrp intakes for Ford smallblocks for 16 years!
Cheers,
Syd.
|
|
DarrenW
|
posted on 15/2/07 at 12:15 PM |
|
|
I thought the same about Boggs manifold until i got one made elsewhere. I got mine as a basic manifold for me to tidy up, this is when i realised just
how much time is involved im making them look as good as a Boggs manifold. If you work out the time they are probs not that expensive for a custom
fabrication that is proven to work.
£188 at a guestimate of £25/hr is only approx 6 hours work plus materials.
[Edited on 15/2/07 by DarrenW]
|
|