craig_007
|
| posted on 1/9/08 at 08:45 PM |
|
|
Cortina upright toe settings
I'm needing to get my tracking sorted out and I'm curious as to what toe setting I should be running,I have read various posts stating
that Cortina uprights benefit from toe out approx 1mm !! Is this correct ?????
I'm going to run camber at 1.5 negative.
Any input would be ideal.
Thanks Craig
|
|
|
|
|
scutter
|
| posted on 1/9/08 at 11:39 PM |
|
|
The figures in THIS thread may help, it's what my cortina front/ capri rear
book car was set to.
ATB Dan.
The less I worked, the more i liked it.
|
|
|
locosaki
|
| posted on 2/9/08 at 06:30 PM |
|
|
Thanks for that Dan,
I have tooken a note of your serttings so will likely go with those settings,I too have Cortina front and Capri rear.Have you had the corner weights
done too ??
How does your handle? Have you had it on track ??
Cheers Mike
|
|
|
scutter
|
| posted on 2/9/08 at 07:27 PM |
|
|
The corner weights were listed in that link as well.
Only once on track, no nasty suprises, which was nice. On the road, must more assured.
ATB Dan.
The less I worked, the more i liked it.
|
|
|
Mark Allanson
|
| posted on 2/9/08 at 08:22 PM |
|
|
Take a look at the cortina original settings, a good starting point except for the castor due to the weight difference
 
Rescued attachment Cortina.JPG
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
|
