a4gom
|
posted on 16/9/08 at 07:10 PM |
|
|
BEC R1 Engine Cradle
Just about to start mounting my '05 motor and want to get as much of the bits, tube, bolts etc as I can to be as productive as possible when I
get chance to go in the garage.
I've seen both but would like peeps opinions on whether to solid mount or use bushes?
If its bushes where from and what size?
Does anyone have any pictures of their 5VY R1 install / cradle?
Any info gratefully recieved.
If you want to email pics
teambuttnaked @ yahoo . co . uk
Cheers
Andy
Andy
Perfect planning prevents pi$$ poor performance!
|
|
|
mackei23b
|
posted on 16/9/08 at 07:17 PM |
|
|
Not an R1, but I've got a ZX9R solid mounted, most of the BECs I've seen are solid mounted.
Cheers
Ian
|
|
hogman
|
posted on 16/9/08 at 08:50 PM |
|
|
Andy see my reply on the wscc
|
|
Taylor R1
|
posted on 16/9/08 at 09:44 PM |
|
|
Engine cradle
We used suspension bushes on our cradle.
see photo on pistonheads.
Link
|
|
locoR1
|
posted on 17/9/08 at 06:58 AM |
|
|
Used suspension bushes on mine as well, most manufacturers cars I've seen are solid mounted though so I guess its down to personal preference!
Description
Check out my CB500T Cafe Racer build diary
|
|
a4gom
|
posted on 17/9/08 at 07:46 AM |
|
|
Thanks for the replies, I think i'll throw a few suspension bushes on then just to be safe.
Next question
Where's the cheapest place for bushes?
What size tube do I need for the mounts i.e. the bit the bush sits in?
Andy
Perfect planning prevents pi$$ poor performance!
|
|
locoR1
|
posted on 17/9/08 at 08:01 AM |
|
|
Any of the manufacturers will sell you the bushes and tubes or try ebay.
I got mine from old Luego cant remember how much but them being in Peterborough meant I could just get them when they were needed.
I see your in Yorkshire close to MK?
Description
Check out my CB500T Cafe Racer build diary
|
|