Board logo

What sealant ?
eddbaz - 7/11/08 at 06:30 PM

I need to seal small gaps between ali panels that are powdercoated black,is normal silicon sealant ok to use or is pu adhesive any better?


jacko - 7/11/08 at 06:37 PM

PU is what you need i repair buses for a living and that's what we use
Jacko


MK chippy - 7/11/08 at 07:00 PM

tiger seal.

Dave


rusty nuts - 7/11/08 at 07:17 PM

Brush on seam sealer.


tootall - 7/11/08 at 07:50 PM

pu is the best which tiger seal is just a brand name . brush on seam sealer is not a good idea it drys hard and hs no addesive qualitys pu will stick it down seal it water tight and give the car more strength!!


caber - 8/11/08 at 06:53 AM

Check out Poundsaver for roof and gutter sealant. It seems to be PU rather than silicone and at £1 a tube one helluvalot cheaper!

Caber