What do they come off, and where did you guys get them from.

Cheers

John

Jon,

I've used some alloy pedal covers from Demon Tweeks. The bolt to the MK pedals with a slight mod and have a bigger pedal area, with non-slip faces.

HTH

Nick

ive got a set you can have for £10 including post,let me know and ill send you a pic

John,
I saw a pic on the MK9R web site showing a rubber pedal cover. I e-mailed Austen and he told me he got the rubbers from a kit car show but thought they were available by mail order from kit car sources. To date I have'nt been able to locate any. Hope this helps.

David

someone told me to use sticky backed rubber strip.

Grant at Luego suggests using fairly coarse grit emery cloth fixed with contact adhesive. An alternative is grip tape used on skate boards or tread areas on aircraft wings.

I'm not sure about yours, but, i used the stuart taylor floor mounted pedal box.

I went to halfords and asked about pedal rubbers and they got a selection out. I used (i belive) the transit ones and they fitted perfectly and only cost about £5 for the accelorater pedal I used the non-slip paper that they use to put on skate boards. Very good stuff!

Hope this helps

Mark

I've used MGB rubbers,look smart and are easy enough to get hold of at shows or autojumbles and fit perfect.
Transit are shaped too much and dont fit perfect.

Conrod did you sell the one you had or are they still available.

Gordon

ninja you have mail

You have reply

Vauxhall Corsa pedal rubbers are a nice tight fit- Scrapyard 0££'s

I Used skateboard grip tape. Cost £4.50 and you get so much at least another 10 builders could do theirs in it too!

Sorry, mines spoken for before you ask now!

Paul