Board logo

Seats for the Striker/Riot
Triton - 10/1/09 at 12:07 PM

I will have my high sided seat sorted for fitting into the Striker and Riot once mould cured so at last folk have another choice other than bits of wood covered in pvc....
It's a specific Striker/Riot seat, so a different shape at the front to allow for the taper in the chassis...Price £225 per pair unless I get flooded with orders to point I can reduce it maybe...

Cheers,
Mark

[Edited on 10/1/09 by Triton]

bigfoot4616 - 10/1/09 at 09:48 PM

whats the dimensions? mainly the width at the front

Triton - 10/1/09 at 10:51 PM

Width across the front is 340mm and 370mm across the back at the base.
It's only the high side seat but can be made in the superlite version for those wanting to save a bit more weight.

bigfoot4616 - 11/1/09 at 09:15 PM

sorry mate, one more measurement needed.

whats the overall length? straight line down from back of headrest to front edge of seat.

cheers

Triton - 11/1/09 at 09:28 PM

I will have to do that tomorrow now. Diagonal measurement?

Mark

bigfoot4616 - 11/1/09 at 09:56 PM

quote:
Originally posted by Triton
Diagonal measurement?

Mark


no. i didnt explain that very well.
plumb line down from rearmost part of seat(headrest?) to floor. then measurement from that point to front edge of seat.
trying to work out how far forward the front of the seat will be

problem i have is my tunnel seems to have been altered from standard and is a bit wider so leaving less room for seats

Triton - 14/1/09 at 04:29 PM

Headrest height is 825mm then measurement to front edge of seat is 715mm.

Cheers,
Mark