Hi, As any one use engine turned alloy forn their dash and were can i get it from in staffordshire.

thanks

Nooooooooo its horrible!

One of those things I just dont understand!

Any metal stockists can probably point you in the right direction.

David

You might find it a bit glary in the sunshine

Like this?

Spyker

[Edited on 17/3/09 by Howlor]

Yes like the link, but slightly larger circles

I've "Engine turned" panels myself but only to hide deep scratches and the fact I've used crappy second hand materials!!
For steel/Stainless, use carbonundrum paste and a dowl/broom handle turned down and stuffed in a drill. For ally, brasso, polish, oily wet and dry etc...
A pillar drill works best so you can get the swirls even!!

[Edited on 17/3/09 by owelly]

make your own own with an abrasive
mop.
my mate takes scraches out of the stainless version with the above

Yeah, make your own. Get pillar drill, get abrasive disc, and starting machining.

See you in a year or two

Alternatively, cover it with vinyl.

ATB

Simon

i quite like it, but i would never actually use it!