...on your dash?
I want to make mine tomorrow and dont want to miss anything.

[Edited on 19-6-09 by speedyxjs]

This is POST SVA, but I have


Ignition on/off - Toggle - on/off
Start - Toggle Momentary On

Horn - Steering wheel, momentary on.

Dip Switch - Toggle - On/On (Blue Warning when on main)
Indicators - Toggle - On-Off-On (Yellow Warning)

Fan - Toggle Off/On (Yellow Warning Light)
Hazards - Dual Poll Toggle - Off/On (Flashes Indicator Light.)
Fog Light - Toggle - Off/On (Green Warning.)
Main Beams - Toggle -Off/On
Side Lights - Toggle - Off/On (Green Warning.)

That's it.

[img][/img]

how about a brake level test switch?

quote:

---

Originally posted by Xtreme Kermit
how about a brake level test switch?

---

Not the best picture but...

http://i189.photobucket.com/albums/z282/adrianthorp/Pre-SVA003.jpg

Centre console. Hazards, engine start, stop, ignition
Arc to right of wheel (just visable). Side/headlights, fog, demister, washers, wipers.
Arc to left of wheel (obscured). Main/dip switchover, headlight flash, horn, indicators.
Extreme right of dash (not fitted at time of photo). Fan override.

adrian

Hi,

My dash Savage switches and warning lights, then toggle switches for side lights, head lights, dip/main beam and indicators.

Regards

Bob

I prefer a clean dash, have this setup

quote:

---

Originally posted by matt.c

Description

---

disco_biscuit
Thatīs a really nice solution

i have savage switches all on my dash, taking them out soon if any interest??

The only switch I have on my dash is a Foglight switch with telltale built in. Its actually the original sierra one.

I then have a bright 6 for my warning lights.

Thats it job done.

Will be adding 1 more switch for my demister/blower but again I will probably use the original sierra heated windscreen switch