Board logo

seat runners
bigsteve - 22/11/09 at 08:11 PM

i'm after some seats soon (triton/ jk composite style) and was wondering if you can use adjustable seat runners with them? the problem being that i'm 6ft 5 and my missus erm aint


martylemoo - 22/11/09 at 08:14 PM

I used seat runners on my drivers side, I actually have a set of runners left as I purchased a pair and only used one.

If you send me £10 to cover a courier they are yours.


Humbug - 22/11/09 at 08:16 PM

Triton seats have captive M8 nuts on the bottom. so you should be able to put runners on.

I have a pair of JK Composite seats that cannot be freestanding but have to be fixed to the rear bulkhead, so runners would be a non-runner . However, I believe that JK also do a style that has a base, which would allow runners to be fitted. A quick call should confirm.

Simon


bigsteve - 22/11/09 at 08:24 PM

quote:
Originally posted by martylemoo
I used seat runners on my drivers side, I actually have a set of runners left as I purchased a pair and only used one.

If you send me £10 to cover a courier they are yours.


what seats are you using?


Richard Quinn - 22/11/09 at 08:28 PM

quote:
Originally posted by Humbug
Triton seats have captive M8 nuts on the bottom. so you should be able to put runners on.

I have a pair of JK Composite seats that cannot be freestanding but have to be fixed to the rear bulkhead, so runners would be a non-runner . However, I believe that JK also do a style that has a base, which would allow runners to be fitted. A quick call should confirm.

Simon
I think I have the same style JK seat as Humbug in the passenger side of mine. I also have one of their base mount types on the drivers side and this is on runners. Hope that helps