LocostBuilders - powered by XMB

Wanted: Harness Bolts

tandi - 5/1/10 at 12:18 AM

Hi All
Does anyone have any harness bolts with the 'top hat' spacers or know where I can get them from?

I have not been able to locate them on the net.

Any help would be much appreciated.

cheers
Kevin

James - 5/1/10 at 12:52 AM

Flak Monkey on here does turning for people at good rates.

Might as well keep the money 'in the family' rather than giving it to somone else!

HTH,
James

Mr Whippy - 5/1/10 at 07:36 AM

the spacers are easy to remove from any car in a scrappy and will be free

GMPMotorsport - 5/1/10 at 08:16 AM

Rally design are good for that sort of thing if you need to buy them.

nib1980 - 5/1/10 at 08:23 AM

I Have a bag full at home, let me know what you need and I'm sure i can sort something out.

I also have some plastic covers for the metal ends that passed SVA too

tandi - 5/1/10 at 09:12 AM

quote:
Originally posted by nib1980
I Have a bag full at home, let me know what you need and I'm sure i can sort something out.

I also have some plastic covers for the metal ends that passed SVA too

Let me know how much for 2 bolts and spacers with postage and I'll ping you some gratitude on paypal or buy you a beer at a show?

Cheers

nib1980 - 5/1/10 at 09:32 AM

quote:
Originally posted by tandi

quote:
Originally posted by nib1980
I Have a bag full at home, let me know what you need and I'm sure i can sort something out.

I also have some plastic covers for the metal ends that passed SVA too

Let me know how much for 2 bolts and spacers with postage and I'll ping you some gratitude on paypal or buy you a beer at a show?

Cheers

no problem,
what length of Bolt?,
what size of top hat?
What size spacer?
What thread? (7/16th i presume)

I'll post some piccys tonight if it will help

many thanks

Neil

coozer - 5/1/10 at 11:34 AM

Go down the scrappy and take the ones from the front of a Ford Ka. Nice top hats correct grading and IVA friendly buckles and plastic covers.

Don't use the back ones aas they are too long and the ones I took out didn't have the grading on them.

tandi - 5/1/10 at 01:49 PM

Hi Neil

Will double check spec of bolts and hats tonight.

Cheers

Kev

nib1980 - 5/1/10 at 10:48 PM

here what i have

bolt setup

bolt parts

[img][/img]

tandi - 6/1/10 at 09:33 AM

This is what I am looking for. Bolts could be longer as they will not foul anything but just take longer to fit!

I think what you have looks like it'll work.

This is what I have on one seat.
Rescued attachment bolt.jpg

nib1980 - 6/1/10 at 11:51 AM

yeah you have the other harness type, and they will work just as well, the differance is the spacer has the shoulder for the harness hole instead of the Bolt like on the one i've shown.

Let me know if you need and more info or need anything.

U2U me if you like

Many thanks

nib1980 - 9/1/10 at 10:22 AM

[img][/img]