Can anyone confirm my fears? In the picture below it shows a single mounting
point for the seatbelt top mount.

Will this pass IVA? I thought the mount needs to be fully welded is this
correct?


[img]http://www.locostbuilders.co.uk/Jaybeee/Top Seat Belt Mount[/img]

[Edited on 9/2/10 by Jaybeee]

link not working

ths one?

Top Seat Belt Mount

That’s it I was starting to loss my patients again!!!!!

Jaybee,

You need to paste this:

http://www.locostbuilders.co.uk/upload/Seat%20Belt%20Mount.jpg

into the box when you add an image.

JB

[Edited on 9/2/10 by Daddylonglegs]

how many patients do you have and how often do you lose them?



looks like its a fully welded in threaded insert to me. Should be ok as long as you've got enough distance between the bottom of the seat and the top of the mount. Personally i'd have a brace to the rear of the mounting as well. 3GES do some nice ones based on the Chris Gibbs book design (guess what i used). Although you can easily make some by buying a strip of steel and drilling a hole in it then welding it to the middle of the threaded boss you've already god.

i have i think m10 bolts going though with bolts welded on the bottom
but i have not iva mine yet


[Edited on 9/2/10 by doddy]

Who are 3GES ?

I'm guessing he means 3GE Components

Ta for the details

one letter, one letter .... come on, its close and i'm dsylexic!!!!

(that is who i meant - thankyou)

Just ordered 4 mounts + braces

It matches the diagrams in the IVA manual and many 2bs have passed with this setup