Board logo

What glue for Vinyl
rallyingden - 11/7/10 at 08:49 PM

As above really. I am trimming my tunnel and also the interior sides ( marine ply) I am having problems with the spray on Bostick I am using. It sticks the vinyl to the ally and to the ply OK but does not stick very good Vinyl to Vinyl ie on the overlaps. Tried using Evo stick brush on but that seems to mely the Vinyl.

What glue have you guys used ?

Cheers
RD


Danozeman - 11/7/10 at 09:05 PM

spray carpet adhesive for me and a staple gun.


stuleah - 11/7/10 at 09:25 PM

We make convertible hoods and the best stuff to use is brush on evostik, brush a layer on both pieces you want to glue wait until its touch dry and then put the pieces together. make sure you get it lined up right as once its together you wont move it.


jabbahutt - 12/7/10 at 07:30 AM

I second brush on Evo stick. Used it on the dash for the reverse edge and it stuck really well. Onlt times it didn't was when I got impatient and tried to rush things.

Used spray adhesive for interior panels etc and found it really poor compared to the Evo stick.


BenB - 12/7/10 at 12:40 PM

I used solvent free evostick. Coming apart after a few years but I also had problems with the solvented version melting things.


A1 - 13/7/10 at 01:56 PM

the solvent free stuff just aint as fun though!