Hi,

there's a few loose ends I'm trying to sort.

How or what are you using to cover the top harness mount, I have a nut cover but was told the actual harness bracket would fail projections?

Using TRS belts with bolt fixings.

Cheers in advance

hi, i made some covers out of leatherete with a poper to cover mine, will try to find one to photo 4 u.
andy

old renault clios 1992-1997 had some sort of plastic cover. You could try to make these fit.

I searched a local scrapyard and found some covers on a Proton something or other. They have a backing plate and I had to extend the collets and get longer bolts but they do finish off the back end.

To the point where they didn't fall off post IVA.

.............. Neil

I searched a local scrapyard and found some covers on a Proton something or other. They have a backing plate and I had to extend the collets and get longer bolts but they do finish off the back end.

To the point where they didn't fall off post IVA.

.............. Neil

Cheers for the replies,

I'll get myself up the scrappy and have a look around.

I might try banging some ali into shape.

Thanks again.