Board logo

Tifosi gaiters/trim rings
scoobyis2cool - 14/6/04 at 05:42 PM

Does anyone have any pics of the handbrake and gearlever gaiters/trim rings available from Tifosi?

They seems pretty reasonably priced but I'd like to see what they look like before I buy

Thanks

Pete


chrisg - 14/6/04 at 07:04 PM

Make some you idle git!!!

Cheers

Chris


scoobyis2cool - 14/6/04 at 07:21 PM

quote:
Originally posted by chrisg
Make some you idle git!!!

Cheers

Chris



Well I wouldn't mind making the gaiters but not sure how well I could make the trim rings, I've got a massive sheet of ally but I'm worried the edges would be a bit rough looking

Pete


barrie sharp - 14/6/04 at 07:31 PM

on my photos (sorry dont know how to post a link) i used them from tifosi
(just looked only shows the gear leaver one)

[Edited on 14/6/04 by barrie sharp]


David Jenkins - 14/6/04 at 08:01 PM

Thanks, Barrie!

I've been looking everywhere for a decent gearstick whatsit! Given up on the scrappies, as they're usually in poor shape by the time I get there...

I'll be ringing Tifosi tomorrow!

cheers,

David


rusty nuts - 14/6/04 at 08:10 PM

I have a pair from Tifosi that I will not be using as I ended up making some from 5mm aly. Get someone with a lathe to turn up and radius the gear lever ring, as for the handbrake trim cut slightly oversize with hacksaw or jigsaw then beg, borrow or steal a belt sander to radius edges. you can have mine for a fiver plus p and p . rusty


scoobyis2cool - 14/6/04 at 09:07 PM

Rusty, you have U2U

Pete


rusty nuts - 15/6/04 at 05:57 PM

scoobyis2cool, you have u2u , Rusty


scoobyis2cool - 15/6/04 at 06:47 PM

Rusty, so do you...

Pete


rusty nuts - 16/6/04 at 08:38 PM

scoobyis2cool you have another u2u, Rusty


Alan B - 16/6/04 at 08:43 PM

FFS get a room...


Mark Allanson - 16/6/04 at 09:23 PM

Alan, you are only pissed off because you didn't get one!