Evening all,

Hope everyone is well?

I was browsing on here the other day and read somewhere about sticky back carbon fibre sheeting. Does anyone have any ideas about such a covering for a dashboard? I can't buy a ready made dash because it's different dimentions to a normal kit.

Thanks in advance,

Chris

Do you mean vinyl, 3m di-noc is the best one if thats what you mean. Look on ebay for it , ives used it on the front and rear cycle wings and aerosceen

quote:

---

Originally posted by afj
Do you mean vinyl, 3m di-noc is the best one if thats what you mean. Look on ebay for it , ives used it on the front and rear cycle wings and aerosceen

---

3m di-noc is about as close as you can get to the real thing - it is not simply printed vinyl and has a very realistic feel. I covered my netbook in the stuff and its pretty damn good.

3M DiNoc looks like this with 2 coats of laquer

Carbon fibre?

I have used the ebay equivalent stuff recently and it is really good. No matter how close you look it looks like weave but un lacquered. It stretches really well though. I managed to cover the equivalent size of half a large easter egg to perfection.

Depending on how contoured your dash is it would be good to use. Flat dash like the MK and MAC1 would be easy. Mine would never look right so I didnt bother!!!

HTH

Biz

Picture of mine, not great but will give you the general idea. HTH Ray

[img]
Description [/img]

Finished mine today (been waiting for gauges). I used the 3m stuff mentioned above.





[Edited on 5/5/11 by David_17]

[Edited on 5/5/11 by David_17]

Looks like it has come out lovely