Board logo

wheel studs
Arthur T wareing - 16/5/11 at 02:27 PM

Hi All sent for my spacers and longer wheel studs I have knocked them out in the past but my luck has't been very good lately and I'm thinking of pushing them out with a g clamp or ball joint tool any ideas would be welcome thank for all your help in the past. regards Arthur


Miks15 - 16/5/11 at 03:07 PM

i would get a socket on the back of the hub over the head of the bolt, then, with the nut on so you dont damage the threads, put a gclamp on and press them out


big_wasa - 16/5/11 at 06:44 PM

I pushed mine out with a ball joint spliter.


britishtrident - 16/5/11 at 06:51 PM

Just screw a nut and tap the nut with 0.5kg hammer --- use a lump of wood between the nut and the hammer.