Board logo

rear view mirror with aeroscreen
AndyW - 15/6/13 at 09:56 AM

Just wondered what type of rear view mirror to use with an aeroscreen? I've seen the two types on CBS, one IVA ok and one not (Although the non iva one seems to be missing just the trim)
So what works best? I know I will have to drill a hole through the screen just want one that looks good and is practical.

Ta

Andy

Davegtst - 15/6/13 at 11:52 AM

I used the CBS IVA one, it's the same as the other one but with trim glued on. Drill a hole through the aeroscreen and use a rubber grommet to keep it neat.

AndyW - 15/6/13 at 02:32 PM

quote:
Originally posted by Davegtst
I used the CBS IVA one, it's the same as the other one but with trim glued on. Drill a hole through the aeroscreen and use a rubber grommet to keep it neat.


Thanks Dave.

matt_gsxr - 15/6/13 at 02:53 PM

What about this rather lovely one from SPA design. I covet one of these.

http://www.jjcraceandrally.com/race/interior-mirrors/spa-design-centre-post-rear-view-mirror

jacko - 15/6/13 at 03:03 PM

Description
Description
why have it stuck up at all this is where i have mine and i can see all i need to
Jacko

rusty nuts - 15/6/13 at 03:28 PM

For an MOT test you only need an OS and If you have a NS mirror a center mirror isn't required, Don't know if that's the case for IVA though,

nick205 - 15/6/13 at 06:35 PM

I fitted the rear view mirror from my donor Sierra upside down bolted to the scuttle. Rock solid, perfect view, no holes in the aero screen and SVA passed.