Board logo

Fixing Rubber Mat
Simon - 3/9/05 at 07:02 PM

I've tried using double sided carpet tape, but it hasn't worked.

Any other suggestions welcomed please.

Thanks

ATB

Simon


Peteff - 3/9/05 at 07:56 PM

Spray glue on both surfaces, let it tack off then stick it together. I use Mirka mirtak aerosol adhesive.


Avoneer - 3/9/05 at 08:01 PM

Is it the matt to the floor?

If you don't want to get it out again - polyureathne sealant.

Pat...


theconrodkid - 3/9/05 at 08:57 PM

i found rubber mat went all soft and strechy when it got warm,used wet n dry 80 grit glued down now


Simon - 3/9/05 at 09:49 PM

Cheers chaps,

Looks like I'll be re-doing tomorrow

ATB

Simon