This is very slightly OT but I'm sure will be of use to builders too.

Got a project at work where I need some hard plastic or rubber trim to finish the edge of some metal parts we're having made.

Its about 1.7mm steel and what I'm looking for is a small U section with legs about 5mm long to "clip" over the edge of the metal.

If its soft rubber then it'll be glued on, but preferably hard plastic which will self grip the painted/powder coated surface.

I'd appreciate any hints on where the stuff can be sourced, I'm sure somebody has used it on their car for panel edging.

ta
Chris

go to

www.rswww.com

and serach for edging strip

should be something there

HTH
Ray

[Edited on 17/11/05 by rayward]

[Edited on 17/11/05 by rayward]

Most people use it on the front cycle wings to pass sva, try looking in the sva/legal section of this board for people who have just passed sva, they might have some going spare now

The other place you should find it this weekend is the Exeter show
Jason

quote:

---

Originally posted by rayward
go to

www.rswww.com

and serach for edging strip

should be something there

HTH
Ray

---

http://www.woolies-trim.co.uk/

[Edited on 18/11/05 by jonbeedle]

Second Woolies!