Board logo

Suitable seat runners for Cobra 7's
Chippy - 10/4/06 at 11:24 PM

Hi, just spent half an hour searching, but with no luck. Does anyone know which runners will work on these seats. I have a couple of sets of Suzuki Alto runners that fit the seats exactly, but, with the runners fully back I cannot get the rear bolts in, as the runners are still well under the seat base. The Cobra ones dont seem to be any use, as they are shown on their site on a raised base. Any assistance greatly apreciated. Regards Chippy.


ReMan - 11/4/06 at 08:03 AM

You're right the site doesnt show these sort (see link)

https://secure.visav.co.uk/avshop/products.asp?getcats=true&cat=7&scat=47

I and lots of others have these.
Some rip runners off other cars. Do a search on here for seat runners.


Peteff - 11/4/06 at 10:35 AM

I tacked the bolts in my runners before I fitted them to the car, making them captive, then marked the end of the bolts and dropped them in place to position the holes.


Chippy - 11/4/06 at 09:55 PM

Thanks guy's, as stated in my posting, already spent half an hour searching through the back postings. I think that the runners that you showed on your link ReMan should do the job nicely. atb Chippy.