Hi Guys,

A beginners question for you if I may?...

Where should I be looking (or what particular part should I be looking for) to mount my MK GRP racing seats on a slider system?

They are presently just bolted to the floor of my Luego Velocity.

Found that at Cadwell last Saturday I was both too low down and that other drivers struggled with the seat so far back.

Any help greatly appreciated.

Regards


Kyle

PS: If anyone has what I need there's cash waiting

MK actually have siders, two types for their glass seats. I'm currently fitting mine right now! Ones done...They need one hole drilled per slider and a wee bit of adjustment with a hammer as there is enough play in them to let the seat rock. Easy to sort though.



[Edited on 8/2/07 by macnab]

Cheers macnab,

If you have any photos of the said units and hole(s) to drill would very much appreciate you drop me an e-mail

Kyle.Harrison@BTConnect.Com

Been on the MK website - £63 for the pair

Many thanks

[Edited on 8/2/07 by The Great Fandango]

You have u2u

quote:

---

Originally posted by macnab
MK actually have siders, two types for their glass seats. I'm currently fitting mine right now! Ones done...They need one hole drilled per slider and a wee bit of adjustment with a hammer as there is enough play in them to let the seat rock. Easy to sort though.


[Edited on 8/2/07 by macnab]

---

I got a really low pair from a guy off ebay who had quite a few sets.
Fitted fine to my GTS seats with an extra bolt hole in the runner to line up with the fixed insert.

I'll see if I can find a link.

http://cgi1.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140081841030

I bought them for £7.99 each as they were "used" not new, but you'd not notice anyway.

[Edited on 8/2/07 by the_fbi]

I used a pair of Escort (last generation) sliders under the MK seats. They are very slim, and the seat is actually only 5 mm from the floor (as the mounting surface for the sliders is higher than the deepest part of the seat. Very cheap at a scrappy, and work perfectly!