Board logo

fixings for dashboard
mkblade - 3/6/07 at 10:43 PM

ive seen these neat locking caps/screws that hold the dash to the scuttlle can any one tell me where i might be able to buy some.

ive got normal button head at the moe,but the ones in the pic look better

many thanks
simon Rescued attachment stonleigh pics brands 009.jpg
Rescued attachment stonleigh pics brands 009.jpg


Humbug - 3/6/07 at 10:45 PM

They look like number plate screw covers - open them up, put the screw through and tighten it up, then click donw the cover. If so, then Halfrauds, local motor factor, etc. should have them


ReMan - 3/6/07 at 10:45 PM

They look like normal number plate fixing cups and caps?


Pezza - 3/6/07 at 11:36 PM

Wot they said! ^
might want to resize yer pics though, i'm running a 22" widescreen and the didn't fit on that lol


mike smith1 - 4/6/07 at 01:31 PM

Why not bond some fastenings to the rear of the dash so you cant see any bolts / screws etc.

We have done it like this, i'll get some pics when i get in

Mike


edspurrier - 12/6/07 at 01:25 PM

I drilled through fibregalls and dash, then recessed and Araldited some short M6 bolts in to the ply you can't feel the head through the foam but they slot through the GRP to nuts there. Very easily done.