Anyone know where I can get M11 x 1.25 nuts for my harness eyebolts? Namrick don't do them and the tool shop doesn't carry taps in this size. I need them to make up some risers for the back top mounts

Caber

Use 7/16 UNF which is the standard size, or if you really want to use metric, move upto 12mm fine. 11mm is the SVA minimum, not the definitive.

Hi i use a company in Livingston for my hardware and my mate got eyelet nuts for the stock car there a while ago.They do metric and imperail nuts and bolts as well. They are SLS Engineering Supplies
3 Deans Service Industries St. Andrews Way
Deans
Livingston
EH54 8QH
01506 400995

Worth a call


Cheers Ronnie

Are all seatbelt bolts not 7/16" UNF? I thought it was the size that had been agreed on by whoever way back when? I think Volvo had something to do with it. Even the the Japanese use it!

I have a 7/16 UNF tap here I could lend you if you want to go down that road. U2U me if yes