can anyone tell me what tools i may need to get the runners of the metro seats.
dont want to drive 20 miles to breakers and find ive left something behind

cheers
simon

you need torqks bits

quote:

---

Originally posted by dave-69isit
you need torqks bits

---

The bottom seat pad comes off easily if you flip up the plastic U strip on all sides underneath - use a big flat screwdriver.

The back of the seat then comes off dead easy.

Then just undo the 4 Torx that hold the runners to the floor and take out the lower half of the seat with runners attached.

You'll need to cut this apart at home later.

Pat...

To get the seats out - torx drive as mentioned. To remove the runners I had to use an angle grinder