what have people done with regards to the clutch pedal and a return spring to make the pedal "sit inline" with the brake pedal?

mine is a floor mounted pedal box ( luego )

Bolt a "stop" to the floor to limit how far the pedal returns. Haven't used a return spring on my car, had no problems in 3 years

Hi just had to do the same thing today on a customers car. Used a light spring from the baulkhead to the pedal and the same with the brake pedal to remove all the slack in the pedal ect.

Certinaly not good engineering but when working with a c##p desighn it'll have to do for now till the pedal box is replaced with a proper setup.

Cheers Matt