Board logo

carbon fiber effect board
roadrunner - 6/1/08 at 07:31 PM

Anybody now where i can get a sheet from, winter upgrades in prosses.

StevieB - 6/1/08 at 07:48 PM

Try ESP Plastics - they do some fairly reasonable prices, though I don't know what the quality of the material is like (some CF effect can be pretty poor)

locoR1 - 6/1/08 at 07:53 PM

Picked up some samples of the ESP Plastics sheet from a mate yesterday in my opinion it looks very good better than i thought it would!
So the ESP stuff gets my vote i will be ordering some soon!

Dave.........

tomblyth - 6/1/08 at 08:17 PM

Prices are on there web site!

ESP Manufacturing Centre
New Road
Crook
County Durham
DL25 8JN

Tel: [01388] 765400
Fax: [01388] 765300
http://www.esp-plastics.co.uk

tom windmill - 6/1/08 at 08:19 PM

Alright Brad,
That ESP CF sheeting was the stuff we used in the orange car if that gives you a better understanding of what its like
Tom

roadrunner - 6/1/08 at 08:47 PM

Thanks fellas, and i could'nt remember where you got it from ,cheers Tom.
Have got the car through SVA yet.

RichB - 16/1/08 at 09:30 PM

Sorry to add to this post but which of ESPs thicknesses would be suitable for making boot panels from, 2.5mm or 4mm?

Cheers, Rich

Snap-off - 16/1/08 at 09:34 PM

quote:

Sorry to add to this post but which of ESPs thicknesses would be suitable for making boot panels from, 2.5mm or 4mm?


I would go 4mm, the 2.5mm would probably sag.

Steven.

Mark G - 16/1/08 at 09:52 PM

http://www.carbonmods.co.uk/index.asp

These guys look pretty good, Do a few bits for locosts too.

The dash blank looks pretty good value...

02GF74 - 18/1/08 at 11:42 AM

europa spares did or usedto do some carbon fibre matt stuff that you glue on and do some other stuff so it ends up looking like solid carbon fiber as oppoe to some black plastic with little silver rectangles printed on it.