Hi, I like the Momo mod.26 steering wheel a lot, but it is not available larger than 290mm diameter. I started wondering if the steering wheel will be to small for the MNR... The car will be track oriented, but will be used on the road just as much... Anyone has experience with the 290mm Momo? Or anyone has experience with a similar, small size wheel? Should I worry?
By the way, I am 6 foot tall, my co-builders/drivers the same or 1,5" taller, so we need the space under the thigs, too...
Thanks for any pointers!

Yes, I have read the previous similar threads, but many were just guessing if a certain size is better than the other.
Gergely

Im on a sparco 270mm Suede and its spot on, i wouldnt want any smaller. Gives me loads of room for my legs (6ft plus) and doesnt make the steering that heavy. I am on a bike engine tho, saying that 290 should give you the extra needed if your CEC.

A lot depends on your rack ratio - I found a 310mm about right with my 2.9 rack but would probably struggle with anything smaller on normal road use. Track driving is probably easier with a smaller wheel so I think you might be ok.

Just to clarify things, The car will be an R1 engined BEC with no reverse, so road driving / parking will be limited anyway...
Any other people's ideas?

How about a wheel with a flat bottom?

Yes, that's the thing... we are not too keen on flat bottom steering wheels...
And I don't think the biggest problem will be getting in or out - removeable wheel, anyway...

I have a 305mm steering wheel in my R1 engined, quick racked Vortx. I have no problems with it. A 15mm smaller diameter wouldn't worry me. You will need to put 5% more muscle into turning the weel but that isn't much.

Just eat plenty of this, and your be fine

I had a momo 280mm on my last Indy with a quick rack,felt just about right,but being leather it was a bit slippy,I have fitted a suede one to my new car,grip is alot better but it is one of the omp flat bottom 310mm wide by 260mm because I am 6' 3" I keep knocking my legs with the wheel,so I am looking for a 260mm suede wheel now

290mm mod. 26 it is then... in suede leather.
Thanks for the pointers! I will let you all know how it drives once we get it with the kit... It won't be in half a year that we can drive tha car, though...