Board logo

Wilwood Dynalite Brakes complete kit
livelee - 2/1/09 at 06:42 PM

Wilwood dynalite 4 pot calipers
280mm vented discs
Pads with plenty of life left
Fitting kit
Sierra hubs
Braided hose

Basically what you can see in these pictures







Now the hard bit. I have no idea what they are worth so hopefully people will reply with what they think they are worth.

I'll start by asking £400 for both.


martylemoo - 3/1/09 at 08:41 AM

I do not need them, but I shall give you a bump as they look so tasty.


GBaggott - 3/1/09 at 04:28 PM

Will you post?
Cheers Gareth

Oh didn't notice the £400 at the bottom, that seems steep see this link.

http://www.rallydesign.co.uk/product_info.php?cPath=562_563_578&products_id=10507

[Edited on 3/1/09 by GBaggott]


livelee - 3/1/09 at 05:28 PM

I have no idea what they are worth. Feel free to make an offer.

I feel this set is closer to mine due to the vented (but smaller) discs

http://www.rallydesign.co.uk/product_info.php?products_id=3934


GBaggott - 3/1/09 at 10:09 PM

With a 280mm disc do the calipers fit in a 13" wheel?


livelee - 4/1/09 at 10:40 AM

re GBaggott: wheels. I was running them under 15" wheels.

re chris mason: Oh. I took them off of my Mac#1 that was a factory build. They told me they were Dynalites. They would have been purchased in 2005, has the design changed over the recent years?

If there anyway of telling *exactly* what they are? I could not see any ID numbers on them. Perhaps there are some if i was to take them off the hubs?

As I said I genuinely have no idea what they are worth and if they turn out to be powerlites then, obviously, I wouldn't expect Dynalite money.

If anybody is interested then make me an offer. If anybody can tell me how to find out what they are I will do and post up the pics.

Kind Regards

Dan


livelee - 4/1/09 at 11:01 AM

Looking on wilwoods site I used the, highly technical, method of comparing the pictures



Here are Powerlites
http://www.wilwood.com/Products/001-Calipers/015-PL/index.asp

Here are Dynalites:
http://www.wilwood.com/Products/001-Calipers/020-BDL/index.asp

Note how the Powerlites have no allen bolts going through the caliper but the Dynalites, like the calipers I have, have 4 allen bolts going through them.

Does this help?

Thanks

Dan


Tyler - 4/1/09 at 07:51 PM

Powerlites are radially mounted, Dynalites have integral mounts on them. Yours are powerlites. Wish I had the money for them too!


livelee - 8/1/09 at 09:09 PM

Sold.

Discs and hubs still available.

They are actually these calipers:

http://www.wilwood.com/Products/001-Calipers/014-DRM/index.asp